The transmission of a vehicle can be compared to that of a bike. In a multi-speed bicycle, low gears allow for quick acceleration, but not for very much speed; once you get going, you can switch into a higher gear to get that speed. Cars work in essentially the same way, and it’s vital to match your engine output to the speed at which you’re traveling; otherwise, your car simply won’t perform very well.
Your transmission system itself works a bit like a bike. When pedaling a multi-speed bike in a low gear, it’s easy to get acceleration, but hard to work up much speed. By shifting into a higher gear—once the bike is on level ground and moving at a decent clip—higher speed can be achieved. That’s essentially the same function that transmission serves within a car—regulating the power relative to speed. And that requires the use of transmission fluid, which serves a critical function—lubricating your gears and minimizing the effect of daily wear and tear. All of this points to a basic point about vehicle maintenance: You should have transmission fluid inspection—and yes, transmission flush—as part of your regular preventative maintenance schedule.
The transmission is one of the most important systems in your vehicle, yet many drivers don’t quite understand how it works. Essentially, the transmission regulates the amount of power your engine sends to the wheels, relative to the speed you’re going—ensuring an optimal performance. To accomplish this, your transmission needs transmission fluid, which lubricates your gears and prevents wear and tear. Additionally, vehicle owners should be aware of the need for routine transmission maintenance—and in particular, transmission fluid inspection and replacement. You can have this done at Meineke in College Park MD, and we recommend making it part of your routine preventative maintenance schedule.
Your vehicle’s transmission is essential for optimal performance—and if you allow the transmission to fall into disrepair, you shouldn’t be surprised when you encounter a whole host of other problems; potentially issues that are expensive to repair. Basically, your transmission is responsible for shifting gears, regulating the power generated by your engine. You can think of it sort of like a bicycle: You start pedaling in a low gear, building acceleration but not much speed; then, when you start coasting along a flat surface, you can switch to a higher gear and really ramp up your speed. Your transmission works in much the same way, and it can only do so when you take care of it—and that means being careful to check transmission fluid regularly, and perhaps even schedule a transmission flush.
The reason to check transmission fluid is simply to ensure that it’s not getting too dirty; remember that dirty transmission fluid doesn’t work well as a lubricant. By bringing your vehicle in to Meineke in College Park MD, you can get a transmission fluid check and, if needed, a full transmission flush.
The reason you need to have your transmission serviced on a regular basis is simple: The fluid gets dirty, and loses its lubricating power. From there, the wear and tear done to your gears can be major—and if you don’t get it checked out quickly, it could snowball into an even bigger problem down the road. The urgency of transmission maintenance cannot be overstated!
Schedule this service today!Schedule Transmission Services Appointment