Transmission Services Services in Flowood, MS

Why is Transmission Maintenance So Important?

There are different reasons why transmission repair work is so important. One is that you eventually run out of transmission fluid; indeed, you may need a transmission flush anywhere from every 30,000 miles to every 100,000 miles, just depending on the kind of car you drive. And even apart from fluid, your transmission system undergoes a lot of wear and tear just through everyday use—so sooner or later, transmission repair is almost inevitable.

How Often Should You Get a Transmission Flush?

It’s important to take your vehicle to Meineke whenever you notice problems with the transmission. As for how often you should have a transmission flush, that depends on the vehicle; some manufacturers recommend getting a transmission flush every 30,000 miles or so, others every 100,000. You can check in your owner’s manual, but what we really recommend is just having your transmission fluid looked at when you take your vehicle in for routine maintenance, like a tire rotation or oil change.

What’s the Best Way to Have Transmission Maintenance Done?

You can have your transmission inspection and transmission repair needs attended to at Meineke in Flowood MS—and doing so has never been easier. Just head over to the Meineke website today to make a service appointment. While you’re there, look for bargains on the coupon page! And of course, you can also call Meineke directly. Just make sure you don’t delay in taking care of your vehicle transmission. The Meineke experts are on call to help you keep your vehicle running just as it’s meant to!

The Reason to Check Your Transmission Fluid

Your vehicle’s transmission is essential for optimal performance—and if you allow the transmission to fall into disrepair, you shouldn’t be surprised when you encounter a whole host of other problems; potentially issues that are expensive to repair. Basically, your transmission is responsible for shifting gears, regulating the power generated by your engine. You can think of it sort of like a bicycle: You start pedaling in a low gear, building acceleration but not much speed; then, when you start coasting along a flat surface, you can switch to a higher gear and really ramp up your speed. Your transmission works in much the same way, and it can only do so when you take care of it—and that means being careful to check transmission fluid regularly, and perhaps even schedule a transmission flush.

Transmission Maintenance: Understanding the Basics

Your vehicle’s transmission is among its most important systems; without it, it’s impossible for your automobile to function optimally. Thus, it’s critically important to take care of your transmission, and to make transmission repair part of your routine auto maintenance habit. First and foremost, it’s good to understand what the transmission does. Think of a multi-speed bicycle: you begin by pedaling in a low-gear, which allows you to quickly accelerate, but not really reach a high top speed. Then, once you start coasting, you can switch into a higher gear, and thus achieve higher speed. Your automobile’s transmission works in a similar fashion, helping to regulate the power generated by your engine as relative to your current speed. It can only do this when it’s well taken care of, though, and that encompasses a regular check of the transmission fluid as well as the occasional transmission flush.

Why Check Transmission Fluid in Your Vehicle?

The transmission flush is critical because it’s what helps you replace dirty transmission fluid. You see, the function of transmission fluid is to lubricate your gears, safeguarding them against everyday wear and tear. When the transmission fluid becomes dirty, the effects on your entire transmission system can be corrosive. It’s imperative to keep your transmission fluid in good working order, which is why both the transmission fluid check and transmission flush should be on your maintenance radar.