We are committed to keeping you safe and on the road.
Vehicle drop off encouraged. After Hours key drop off available at participating locations.
Please contact your local Meineke for information on enhanced safety measures.
The transmission of a vehicle can be compared to that of a bike. In a multi-speed bicycle, low gears allow for quick acceleration, but not for very much speed; once you get going, you can switch into a higher gear to get that speed. Cars work in essentially the same way, and it’s vital to match your engine output to the speed at which you’re traveling; otherwise, your car simply won’t perform very well.
When it comes time for transmission repair at Meineke in Bremerton WA, you’ll likely know it. You’ll experience any number of symptoms of a faulty transmission—trouble shifting gears, slipping out of gear, a whining noise or a grinding sound when you shift gears, etc. All of these are signs that the time for a transmission flush, or perhaps additional transmission repair work, is now.
Transmission service is needed for a couple of reasons. One, you may have dirty transmission fluid—and dirty transmission fluid needs to be flushed and replaced, otherwise it’s just not very effective. Two, even with transmission fluid, your gears may still take on some wear and tear, and transmission repair work can become necessary for them to work properly again.
One of the most common forms of transmission maintenance is the transmission flush—basically, having your dirty transmission fluid cleaned out and replaced. This is needed for a simple reason: As your transmission fluid becomes dirty, it ceases to function the way it’s meant to, and that can lead to more wear and tear for those gears. It’s recommended that you get a transmission flush done on a quasi-regular basis, much like you do with your oil change and tire rotation.
The reason to check transmission fluid is simply to ensure that it’s not getting too dirty; remember that dirty transmission fluid doesn’t work well as a lubricant. By bringing your vehicle in to Meineke in Bremerton WA, you can get a transmission fluid check and, if needed, a full transmission flush.
The transmission flush is critical because it’s what helps you replace dirty transmission fluid. You see, the function of transmission fluid is to lubricate your gears, safeguarding them against everyday wear and tear. When the transmission fluid becomes dirty, the effects on your entire transmission system can be corrosive. It’s imperative to keep your transmission fluid in good working order, which is why both the transmission fluid check and transmission flush should be on your maintenance radar.
Schedule this service today!Schedule Transmission Services Appointment