Meineke Franchisees are now hiring! See available career opportunities
As for when you should take your vehicle into Meineke at Raleigh NC to have transmission maintenance and possibly transmission repair work done, the short answer is: You should get transmission repair work done whenever your transmission shows signs of failure. There are many different ways in which you can tell your transmission is going out. If you experience hesitation when shifting gears, falling out of gear, or shifting gears for no reason, those are all warning signs. Grinding and shimmying between gears are also bad omens, and even unusual noises or whining sounds can point to the urgent need for transmission repair work.
Your transmission system itself works a bit like a bike. When pedaling a multi-speed bike in a low gear, it’s easy to get acceleration, but hard to work up much speed. By shifting into a higher gear—once the bike is on level ground and moving at a decent clip—higher speed can be achieved. That’s essentially the same function that transmission serves within a car—regulating the power relative to speed. And that requires the use of transmission fluid, which serves a critical function—lubricating your gears and minimizing the effect of daily wear and tear. All of this points to a basic point about vehicle maintenance: You should have transmission fluid inspection—and yes, transmission flush—as part of your regular preventative maintenance schedule.
The transmission is one of the most important systems in your vehicle, yet many drivers don’t quite understand how it works. Essentially, the transmission regulates the amount of power your engine sends to the wheels, relative to the speed you’re going—ensuring an optimal performance. To accomplish this, your transmission needs transmission fluid, which lubricates your gears and prevents wear and tear. Additionally, vehicle owners should be aware of the need for routine transmission maintenance—and in particular, transmission fluid inspection and replacement. You can have this done at Meineke in Raleigh NC, and we recommend making it part of your routine preventative maintenance schedule.
Your vehicle’s transmission is essential for optimal performance—and if you allow the transmission to fall into disrepair, you shouldn’t be surprised when you encounter a whole host of other problems; potentially issues that are expensive to repair. Basically, your transmission is responsible for shifting gears, regulating the power generated by your engine. You can think of it sort of like a bicycle: You start pedaling in a low gear, building acceleration but not much speed; then, when you start coasting along a flat surface, you can switch to a higher gear and really ramp up your speed. Your transmission works in much the same way, and it can only do so when you take care of it—and that means being careful to check transmission fluid regularly, and perhaps even schedule a transmission flush.
The question is, when do you know it’s time to schedule some transmission maintenance? Well, it’s good to check transmission fluid levels regularly—perhaps when you bring your car in for an oil change or tire rotation, once or twice a year. You should also schedule transmission repair if you notice any problems shifting gears, such as strange noises during the gear shift process.
The transmission flush is critical because it’s what helps you replace dirty transmission fluid. You see, the function of transmission fluid is to lubricate your gears, safeguarding them against everyday wear and tear. When the transmission fluid becomes dirty, the effects on your entire transmission system can be corrosive. It’s imperative to keep your transmission fluid in good working order, which is why both the transmission fluid check and transmission flush should be on your maintenance radar.
Schedule this service today!Schedule Transmission Services Appointment