The transmission of a vehicle can be compared to that of a bike. In a multi-speed bicycle, low gears allow for quick acceleration, but not for very much speed; once you get going, you can switch into a higher gear to get that speed. Cars work in essentially the same way, and it’s vital to match your engine output to the speed at which you’re traveling; otherwise, your car simply won’t perform very well.
Your transmission system itself works a bit like a bike. When pedaling a multi-speed bike in a low gear, it’s easy to get acceleration, but hard to work up much speed. By shifting into a higher gear—once the bike is on level ground and moving at a decent clip—higher speed can be achieved. That’s essentially the same function that transmission serves within a car—regulating the power relative to speed. And that requires the use of transmission fluid, which serves a critical function—lubricating your gears and minimizing the effect of daily wear and tear. All of this points to a basic point about vehicle maintenance: You should have transmission fluid inspection—and yes, transmission flush—as part of your regular preventative maintenance schedule.
You can have your transmission inspection and transmission repair needs attended to at Meineke in Fenton MO—and doing so has never been easier. Just head over to the Meineke website today to make a service appointment. While you’re there, look for bargains on the coupon page! And of course, you can also call Meineke directly. Just make sure you don’t delay in taking care of your vehicle transmission. The Meineke experts are on call to help you keep your vehicle running just as it’s meant to!
Your vehicle’s transmission is essential for optimal performance—and if you allow the transmission to fall into disrepair, you shouldn’t be surprised when you encounter a whole host of other problems; potentially issues that are expensive to repair. Basically, your transmission is responsible for shifting gears, regulating the power generated by your engine. You can think of it sort of like a bicycle: You start pedaling in a low gear, building acceleration but not much speed; then, when you start coasting along a flat surface, you can switch to a higher gear and really ramp up your speed. Your transmission works in much the same way, and it can only do so when you take care of it—and that means being careful to check transmission fluid regularly, and perhaps even schedule a transmission flush.
The reason to check transmission fluid is simply to ensure that it’s not getting too dirty; remember that dirty transmission fluid doesn’t work well as a lubricant. By bringing your vehicle in to Meineke in Fenton MO, you can get a transmission fluid check and, if needed, a full transmission flush.
There are a few warning signs that it’s time for a transmission maintenance appointment. If you notice that your car seems to have a hard time shifting gears—if there is a jostling, or a grinding noise—that’s a dead giveaway. The car slipping out of gear, or changing gears at random times, is another one. And any whining noise you heard could point to a transmission issue. That means it’s time to take your car to Meineke in Fenton MO for maintenance!
Schedule this service today!Schedule Transmission Services Appointment