COVID-19: Contact your local Meineke for information on enhanced safety measures
SAS stands for Steering and Suspension system, which is an integral part of your vehicle chassis. SAS is mainly responsible for the balance and stability of your car, as well as the smoothness of your ride. The suspension system has multiple components, mainly hydraulics, and springs and struts designed to absorb and dampen the shock of the road. It does so by absorbing the motion of the wheels and granting additional stability. The steering system is comprised of conversion devices, levers, and joints, which are all connected under a complex chain that helps you guide your vehicle on the road and also control it with minimal effort. Together, the steering and suspension systems are what keep your vehicle's wheels firmly on the ground and keep your vehicle from veering to the side. What's more, SAS can affect not only the smoothness of your ride, but it can also impact other systems such as wheel alignment.
A smooth and safe ride is greatly dependent on your SAS system, so be sure to have it checked if you notice signs of a troubled steering and suspension system. These signs can vary, from excessive noise coming from under your car when driving over bumps, to experiencing too much bounciness or sways. Other common symptoms may include vibrating or a crooked steering wheel, as well as premature and uneven wear of your vehicle's tires. All in all, if your overall ride is shaky, bumpy and harsh, or if you're finding your car to be particularly hard to handle and control, then be sure to contact our experts at Meineke #246 in Glen Burnie, MD and schedule an inspection.
Evaluation is always the first step in any vehicle repair process, especially when it comes to steering and suspension. Since your car's SAS systems are comprised of hundreds of different parts and elements, it is important to have a thorough inspection in order to determine the proper cause of the symptoms. This inspection should include the front and rear end, the shocks, struts and coil springs, the wheel bearings and chassis parts, as well as the power steering and power steering fluid. The next step is the repair plan. Depending on the root of the problem, you will be presented with different options for repairs or replacements. Choosing the right repair plan is critical, which is why at Meineke, you can rely on our expert recommendations to get your car on the road stronger and for longer.
Due to the complexity of the steering and suspension system, there are many reasons why your vehicle may be showing certain symptoms. There are also numerous and various fixes available, and you'll find that at Meineke #246 in Glen Burnie, MD - we provide a complete range of services to make sure you get back on the road quickly and safely. If the initial evaluation shows suspension issues, our technicians have great experience in fixing bad spring coils, inspecting tires or replacing shocks and struts. For steering issues, we might need to fix loose lug nuts, replace bad tie rods, balance your tires or repair your steering gearbox. Regardless of the root problem, we can provide you with a full service for your SAS system, so that you can go back toa smooth, comfortable and safe ride.
We promise to get you back to your life as quickly as possible while ensuring you enjoy a smooth, safe and controlled ride with a properly functioning SAS system. We promise to conduct a complete system evaluation in order to correctly determine the root problem and design the best repair plan for you and your vehicle. We always have greatly experienced and expert technicians working on your car, conducting all the necessary repairs that you approved, and making sure to have you back on the road in no time. At Meineke, we believe in transparency and trust, so we will provide you with a detailed report of our inspection as well as different repair options and plans, so that you can decide what's best for you.
Schedule this service today!Schedule Steering & Suspension Appointment