The transmission of a vehicle can be compared to that of a bike. In a multi-speed bicycle, low gears allow for quick acceleration, but not for very much speed; once you get going, you can switch into a higher gear to get that speed. Cars work in essentially the same way, and it’s vital to match your engine output to the speed at which you’re traveling; otherwise, your car simply won’t perform very well.
Your transmission system itself works a bit like a bike. When pedaling a multi-speed bike in a low gear, it’s easy to get acceleration, but hard to work up much speed. By shifting into a higher gear—once the bike is on level ground and moving at a decent clip—higher speed can be achieved. That’s essentially the same function that transmission serves within a car—regulating the power relative to speed. And that requires the use of transmission fluid, which serves a critical function—lubricating your gears and minimizing the effect of daily wear and tear. All of this points to a basic point about vehicle maintenance: You should have transmission fluid inspection—and yes, transmission flush—as part of your regular preventative maintenance schedule.
Transmission fluid will eventually get dirty and lose its lubricating power—which makes it necessary to get a regular transmission flush. Additionally, you should take your car in for transmission maintenance any time you detect problems—such as grinding or whining sounds when the vehicle shifts gears. Difficulty changing gears, or frequently slipping out of gear, should also be taken as a warning sign. This is when you need to schedule transmission service ASAP.
Your vehicle’s transmission is essential for optimal performance—and if you allow the transmission to fall into disrepair, you shouldn’t be surprised when you encounter a whole host of other problems; potentially issues that are expensive to repair. Basically, your transmission is responsible for shifting gears, regulating the power generated by your engine. You can think of it sort of like a bicycle: You start pedaling in a low gear, building acceleration but not much speed; then, when you start coasting along a flat surface, you can switch to a higher gear and really ramp up your speed. Your transmission works in much the same way, and it can only do so when you take care of it—and that means being careful to check transmission fluid regularly, and perhaps even schedule a transmission flush.
Your vehicle’s transmission is among its most important systems; without it, it’s impossible for your automobile to function optimally. Thus, it’s critically important to take care of your transmission, and to make transmission repair part of your routine auto maintenance habit. First and foremost, it’s good to understand what the transmission does. Think of a multi-speed bicycle: you begin by pedaling in a low-gear, which allows you to quickly accelerate, but not really reach a high top speed. Then, once you start coasting, you can switch into a higher gear, and thus achieve higher speed. Your automobile’s transmission works in a similar fashion, helping to regulate the power generated by your engine as relative to your current speed. It can only do this when it’s well taken care of, though, and that encompasses a regular check of the transmission fluid as well as the occasional transmission flush.
The transmission flush is critical because it’s what helps you replace dirty transmission fluid. You see, the function of transmission fluid is to lubricate your gears, safeguarding them against everyday wear and tear. When the transmission fluid becomes dirty, the effects on your entire transmission system can be corrosive. It’s imperative to keep your transmission fluid in good working order, which is why both the transmission fluid check and transmission flush should be on your maintenance radar.
Schedule this service today!Schedule Transmission Services Appointment